Description
Compact Footprint — a 50×50×47 cm entry point in Ruiqi’s full catalogue, letting small workshops seal curved and straight edges without committing to a larger machine until throughput demands it.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | ST-50 |
| Product Type | Small Edge Banding Machine |
| Total Power | 1000W |
| Voltage | 220V / 380V / customization |
| Key Features | Curved and straight edge banding |
| Minimum Length of Sheet | 25 CM |
| Minimum Width of Sheet | 3 CM |
| Edge Banding Height | 0–50 MM |
| Edge Banding Thickness | 0.3–3 MM |
| Edge Power | 20W |
| Air Source Pressure | 0.5–0.8 MPa |
| Product Size | 50 × 50 × 47 CM |
| Product Weight | 22 KG |
| Glue Pot Capacity | 1000 ml |
| Feed Speed | (basis not stated in source) |
| Panel Thickness Range | (basis not stated in source) |
| Tolerance | (basis not stated in source) |
| Trimming Stations | (basis not stated in source) |
| Dust Extraction Port | (basis not stated in source) |
| Control System | (basis not stated in source) |
| Language Options | Chinese and English (other languages customizable) |
| Plug Options | EU, USA, AU, UK |
Application Suitability
| Application | Material or Output |
|---|---|
| Home decoration panel production | MDF and particleboard with PVC or veneer edge banding |
| Small workshop furniture repair | Plywood and solid wood panels requiring re-edging |
| Custom joinery startup | Ecological board and plywood with curved or straight profiles |
| Low-volume cabinet making | Particleboard and MDF up to 50 mm edge height |
Why the Voltage Question Should Come Before the Price for Any Edge Banding Machine Manufacturer
Confirm local voltage and frequency before you compare a single specification.
I once shipped a compact edge bander to a Southeast Asian customer without double-checking their three-phase supply. The machine sat on their floor for three full weeks while they arranged an electrical retrofit — production stopped, deadlines slipped, and trust took far longer to rebuild than the shipment itself. With the ST-50 configurable from 220V single-phase to 380V three-phase, that mistake is avoidable, but only if the conversation happens at quotation stage [NEED_CITE: voltage and frequency standards by export market]. Buyers who skip this step often discover the problem only when the contractor opens the control cabinet on day one.
Where the ST-50 Sits in the Complete Edge Banding Range
This model anchors the entry-level tier of Ruiqi’s full catalogue. It handles curved and straight edge sealing on panels as short as 25 cm and as narrow as 3 cm — dimensions that larger automatic machines simply cannot accept. For a joinery startup evaluating whether mechanised edge sealing is worth the investment, the ST-50 provides a low-commitment starting point while leaving a clear upgrade path to pre-milling and multi-station models higher in the same product family.
How Compact Footprint Changes Workshop Layout Planning
At 50 × 50 × 47 cm and 22 kg, the ST-50 can sit on a standard workbench beside a panel saw, eliminating the dedicated floor space a full-size automatic edge bander demands. Small workshops operating in rented units or shared industrial spaces often cannot allocate a separate zone for edge sealing [NEED_CITE: typical small workshop floor space constraints]. The unit’s 1000W total power draw also means it runs on a standard single-phase outlet without requiring a dedicated high-amperage circuit, which simplifies installation considerably.
Reading the Specification Sheet Against Your Actual Production
The 0.3–3 mm edge banding thickness range covers standard PVC, melamine, and thin wood veneer tapes commonly stocked by regional suppliers, but it does not extend to the thick solid wood lipping required by premium furniture lines. The 0–50 mm edge height and 1000 ml glue pot capacity are matched to short production runs rather than continuous shift work — refilling mid-run is expected. The minimum sheet width of 3 cm and length of 25 cm let you process small off-cuts and repair pieces that would jam a larger feed system, though panels below these dimensions still require manual edge finishing. Air source pressure between 0.5 and 0.8 MPa must be supplied externally; a small piston compressor rated for this band is sufficient for one machine.
The Cost of Putting an Entry Machine Under Production-Line Pressure
Workshops that buy the cheapest available unit and then push it through eight-hour continuous runs typically see glue pot temperature drift, uneven edge adhesion on curved sections, and accelerated wear on the feed mechanism [NEED_CITE: common failure modes in underspecified edge banders]. The ST-50 is transparently positioned for low-volume and intermittent use — home decoration batches, repair work, and prototyping. Running it beyond that scope does not destroy the machine immediately, but it does produce inconsistent edge quality that shows up only when the customer inspects the finished cabinet door under direct light.
Why Sourcing the Full Range from One Manufacturer Matters
Ruiqi’s in-house manufacturing covers the entire edge banding family, so moving from the ST-50 to a pre-milling automatic model later means one supplier relationship, one documentation format, and one spare parts channel. Voltage and plug configuration are confirmed at quotation stage — EU, USA, AU, and UK plugs are standard options, with further regional variants on request. The four-stage QC process applies to every tier, so the entry model receives the same incoming material inspection and pre-shipment verification as the top-of-line unit. Control panel language is set before dispatch, and the operation manual ships in the agreed language rather than arriving in Chinese with a rough translation attached. Factory visits and sample processing tests on your own substrate are available before you commit.
Documentation & Verification
- Electrical schematic with your confirmed voltage and frequency printed on the drawing
- Factory test record showing curved and straight edge results on your specified panel material
- Operation and maintenance manual delivered in the operator’s working language
- Spare parts list matching the ST-50 configuration you ordered, including glue pot and feed components
Installation, Commissioning & Support
- 22 kg unit requires no foundation — place on a level workbench rated above 50 kg
- Dedicated 220V or 380V circuit matched to confirmed plug type before the machine arrives
- Glue pot filled and heated to operating temperature during first commissioning with guidance provided
- Air compressor supplying 0.5–0.8 MPa connected and leak-tested before first panel run
- Multilingual control panel verified against operator language during pre-shipment testing
What to Include in Your Inquiry
To receive a configuration that matches your actual workshop, specify the panel materials you process most often, the edge banding thickness and height you typically use, and whether your work involves curved profiles or straight runs only. State your local voltage, frequency, and preferred plug type so the electrical package is locked before production. If you want a sample edge-sealing test on your own substrate before ordering, send a panel and banding material sample with your inquiry.
Frequently Asked Questions
Q: Where does the ST-50 fit in the full edge banding range, and when should I step up to a higher-tier model?
A: The ST-50 anchors the entry tier for intermittent, low-volume work such as home decoration batches and furniture repair. If your workshop runs continuous daily production, handles thick solid wood lipping above 3 mm, or needs pre-milling for consistent edge preparation, a higher-tier automatic model in the same product family is the appropriate next step.
Q: How do I confirm the correct voltage and plug type for my local electrical supply?
A: Provide your local supply voltage, phase configuration, and frequency at inquiry stage. Ruiqi configures the ST-50 for 220V or 380V accordingly and fits EU, USA, AU, or UK plugs as standard, with other regional variants available. The electrical schematic ships with confirmed values printed on the drawing.
Q: What panel materials and edge banding thicknesses is this model verified to handle?
A: The ST-50 processes MDF, particleboard, plywood, solid wood board, and ecological board with PVC or veneer edge banding between 0.3 and 3 mm thick and up to 50 mm in height. Materials outside this range — such as thick solid wood lipping or acrylic high-gloss tapes — require evaluation against a higher-tier model.
Q: Can I request a sample edge-sealing test on my own material before ordering?
A: Yes. Send a representative panel off-cut and the edge banding material you intend to use. Ruiqi runs a curved and straight edge test on the ST-50, documents the result, and shares the test record so you can evaluate adhesion and finish quality on your specific substrate before committing to an order.
