Description
Precision-ground components with proprietary cutting mechanisms — verified ±0.02mm tolerance across the full model range, engineered for panel furniture factories scaling from single-machine setups to complete production lines.
Technical Specifications
| Parameter | Value |
|---|---|
| Product Type | Automatic Edge Banding Machine |
| Overall Dimensions (L×W×H) | 435 × 92 × 165 cm |
| Total Installed Power | 17.5 kW |
| Voltage & Frequency | 380V / three-phase five-wire / 50Hz (configurable 110V–440V) |
| Conveying Motor | 2.2 kW with frequency converter |
| Lifting Motor | 0.25 kW with inverter |
| Pre-milling Motor | 3.5 kW |
| Trimming Motors | 0.75 kW × 2 |
| End Trimming Motors | 0.37 kW × 2 |
| Edge Trimming Motor | 0.18 kW with inverter |
| Polishing Motors | 0.37 kW × 2 |
| Slotted Motor | 220V 0.8 kW |
| Glue Pot Heating Power | 1.2 kW |
| Heat Gun Power | 2 kW |
| Glue Pot Capacity | 2000 mL |
| Glue Pot Operating Temperature | 150–170°C |
| Edge Banding Thickness | Up to 1.2 mm (material dependent) |
| Edge Banding Width | 20–50 mm |
| Panel Thickness Range | 18 / 22 / 25 mm |
| Minimum Panel Dimensions | >100 mm width, >250 mm length |
| Feed Speed | 0–12 m/min (variable, inclined straight edge) |
| Edge Banding Material | PVC |
| Air Source Pressure | 0.6–0.8 MPa |
| Dust Extraction Port | 100 mm diameter |
| Control System | Xinjie industrial touch screen with Xinjie industrial inverter |
Application Suitability
| Application | Material or Output |
|---|---|
| Custom cabinet and wardrobe board processing | MDF and particleboard with PVC edge banding |
| Panel furniture component edging | Plywood and melamine-faced board |
| Pre-milling for board sizing accuracy | Particleboard and MDF requiring edge preparation before banding |
| Workshop-scale production environments | Straight-edged workpieces across furniture manufacturing |
Why the Voltage Question Must Come Before the Quotation
Confirming local voltage and frequency before production prevents weeks of installation delays.
I have seen automatic edge banding machine for sale orders arrive at workshops only to sit idle because the local three-phase supply did not match the motor configuration. The factory waits for a transformer, the production line stalls, and operators stand around an unusable machine. Voltage mismatches remain one of the most common commissioning failures in exported woodworking equipment [NEED_CITE: voltage and frequency standards by export market]. This range supports configuration from 110V to 440V, and the electrical schematic is confirmed against the destination market before production begins.
From Entry-Level Straight-Edge to Full Pre-milling Configuration
This automatic edge banding machine lineup covers every stage of a furniture factory’s growth path. An entry-level model handles straight PVC edging on standard panel thicknesses, while the full-function pre-milling configuration adds board sizing correction before the glue station. A workshop can start with a single unit and add capacity later within the same product family, avoiding the compatibility gaps that appear when machines from different suppliers are mixed on one floor.
Multi-Station Processing in a Single Pass
The processing head runs pre-milling, end trimming, edge trimming, and polishing sequentially as the panel moves through on the frequency-controlled conveyor. Each station addresses a specific edge defect: the pre-milling cutter squares the board edge before glue application, trimming removes excess banding material, and polishing eliminates visible glue residue. This single-pass architecture means the operator feeds a raw panel at one end and receives a finished component at the other [NEED_CITE: edge banding process stages and quality checkpoints].
How Feed Speed, Panel Thickness, and Glue Temperature Interact
The variable feed speed of 0–12 m/min works in tandem with the frequency-controlled conveying and lifting motors to maintain consistent pressure across different panel thicknesses. Thicker boards at 25 mm require slower feed rates to allow adequate glue penetration and curing time at the 150–170°C operating temperature. The 2000 mL glue pot capacity supports continuous runs without frequent refills, while the 100 mm dust extraction port connects to centralized workshop collection systems to keep the glue station clean and the bonding surface free from particulate contamination.
The Hidden Cost of Skipping Pre-milling
Boards cut on a panel saw rarely have perfectly square edges. Without pre-milling, the edge banding follows every irregularity in the substrate, producing visible waviness and inconsistent glue lines that become obvious under workshop lighting. Panels that look acceptable at the machine may fail during assembly when adjacent components do not align flush. The pre-milling station on this automatic edge banding machine for sale removes a thin layer from the board edge to create a true reference surface before the glue is applied, addressing the root cause rather than masking the symptom [NEED_CITE: substrate preparation requirements for edge banding adhesion].
Why Procurement Starts with the Engineering Conversation
Every quotation begins with an engineer-led configuration review based on the buyer’s factory scale, processing requirements, and existing equipment layout. The specification sheet and electrical schematic are confirmed against the destination market’s voltage and frequency before the order enters production. Four-stage quality control covers incoming material inspection, in-process verification, finished product testing, and pre-shipment validation. Factory visits are welcomed so buyers can witness a live sample processing test on their own board material before committing to a production run.
Documentation & Verification
- CE declaration of conformity issued for this machine class
- Electrical schematic with voltage and frequency confirmed for destination market
- Factory test record on buyer’s specified panel thickness and edge material
- Machine specification sheet with full motor and power breakdown
- Operation and maintenance manual in the agreed operator language
- Spare parts list with wearing component identification
Installation, Commissioning & Support
- 435 cm length requires clear floor space with 100 mm dust extraction ducting routed to collection system
- 380V three-phase five-wire supply on dedicated 17.5 kW circuit with confirmed frequency
- Machine ships assembled with lifting points for forklift positioning on leveled concrete floor
- Xinjie touch screen configured in agreed language before dispatch for immediate operator familiarization
- Glue pot and heat gun require initial temperature calibration run before first production panel
- Wearing parts inventory includes trimming cutters and polishing wheels with reorder guidance
What We Need to Configure Your Machine
Share your primary board material and thickness range, the edge banding type and width you run most frequently, and your local three-phase voltage and frequency. If you have upstream cutting equipment already in place, let us know the model so we can verify feed height and throughput compatibility. We can arrange a sample processing test on your actual panel stock before finalizing the configuration.
Frequently Asked Questions
Q: How do I choose between entry-level and full-function pre-milling models?
A: The choice depends on your board source and output volume. If your panel saw produces consistently square edges and you run moderate volumes, an entry-level straight-edge model handles PVC banding adequately. Factories processing large volumes of particleboard with visible edge irregularities benefit from the pre-milling station, which corrects the substrate before glue application and reduces downstream assembly rejects.
Q: What voltage options are available, and when is this confirmed?
A: This automatic edge banding machine for sale is configurable from 110V to 440V across multiple frequency standards. Voltage and frequency are confirmed during the quotation stage, before production begins. The electrical schematic provided with the quotation documents the exact motor winding configuration, breaker sizing, and cable specification for your facility’s supply.
Q: What panel thickness and edge banding range does this machine support?
A: The machine handles panel thicknesses of 18, 22, and 25 mm with PVC edge banding up to 1.2 mm thick and 20–50 mm wide. The lifting motor with inverter control adjusts feed height automatically across this range. Minimum panel dimensions are 100 mm width and 250 mm length for stable conveying through the processing stations.
Q: Can I visit the factory for a live test on my board material?
A: Factory visits are arranged for buyers who want to verify edge quality on their own substrate before ordering. You send a sample batch of your typical board stock, and we run it through the configured machine with your specified edge banding material. The test panels are inspected together, and any parameter adjustments are documented before the order proceeds.
Q: What spare parts ship with the machine, and how are replacements handled?
A: The initial shipment includes a spare parts kit covering the most common wearing components: trimming cutters, polishing wheels, and glue pot seals. The spare parts list identifies each item with reorder codes. Replacement parts are manufactured in-house and shipped on standard lead times, with technical guidance provided for operator-level changeover procedures.
