Description
Integrated station footprint — The DW802 delivers gluing, trimming, polishing, head-and-tail cutting, and vacuum extraction in one assembled frame, giving buyers a complete entry point within the wider edge banding catalogue.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | DW802 |
| Product Type | Automatic Edge Banding Machine |
| Total Installed Power | 4200W |
| Voltage & Frequency | 220V / 380V / customization (frequency 50Hz/60Hz to be confirmed at order) |
| Control System | PLC |
| Minimum Sheet Length | 250mm |
| Minimum Sheet Width | 100mm |
| Edge Banding Height Range | 0–50mm |
| Edge Banding Thickness Range | 0.3–3mm |
| Edge Feed Motor Power | 140W |
| Transmission Motor Power | 140W |
| Trimming Motor Power | 800W × 2 |
| Polishing Motor Power | 180W × 2 |
| Vacuum Power | 1200W |
| Air Source Pressure | 0.4–0.8 MPa |
| Glue Pot Capacity | 4000ml |
| Overall Dimensions (L×W×H) | 1300 × 600 × 950 mm |
| Net Weight | 135 kg |
| Assembly State | Fully assembled, single-station straight-edge configuration |
| Language Options | Chinese / English default; Spanish and other languages on request |
| Plug Options | EU / USA / AU / UK |
| Standards | CE, ISO 9001 |
Application Suitability
| Application | Material or Output |
|---|---|
| Custom cabinet door edge sealing | MDF and particleboard with PVC or melamine strip |
| Small-batch furniture panel finishing | Plywood and ecological board with veneer banding |
| Joinery workshop straight-edge production | Solid wood board panels up to 50mm banding height |
| Retrofit edge finishing for manual workshops | Board stock transitioning from hand-applied to machine-applied edges |
Why Voltage Must Be Settled Before the Machine Ships
An automatic edge banding machine manufacturer that skips the voltage conversation is shipping you a problem, not a solution.
I have stood in workshops where a brand-new edge bander sat silent for a week because the control transformer was wound for 380V three-phase while the shop only had 220V single-phase available. The PLC would not power up, the glue pot heater could not reach temperature, and the trimming motors refused to start. That is not a machine defect; it is a specification gap between supplier and buyer. When sourcing from an automatic edge banding machine manufacturer for export, local grid frequency matters just as much as voltage — a motor rated for 50Hz running on 60Hz will spin faster, altering feed rates and trimming behaviour in ways that surface only after panels start failing downstream assembly [NEED_CITE: voltage and frequency standards by export market].
Where the DW802 Sits in the Full Catalogue
The DW802 is the compact, fully assembled starting point in a complete edge banding machine family. It covers gluing, trimming, polishing, and automatic head-and-tail cutting in a single station, so a workshop moving away from manual edge application gains all core functions without managing multiple machines. Buyers surveying the full automatic edge banding machine manufacturer range can use this model to understand what a consolidated entry-level configuration looks like before evaluating higher-tier models with additional stations.
Scaling Without Changing Supplier
Workshops that begin with the DW802 often return for a pre-milling or multi-station configuration as panel volume grows. The advantage lies in staying within one product family: control logic, spare parts, and service expectations remain consistent. An automatic edge banding machine manufacturer that offers this progression lets a cabinet maker invest in the machine that matches today’s throughput, knowing the next tier is available from the same engineering team [NEED_CITE: phased equipment investment in custom furniture production].
Reading the Specifications for Real Production Impact
The 800W × 2 trimming motor configuration gives the DW802 enough cutting authority for PVC and melamine strip at 0.3–3mm thickness without bogging down on denser substrates. The 4000ml glue pot capacity reduces refill pauses during sustained runs of identical panel sizes — a detail that matters when a batch of fifty cabinet sides needs continuous edge coverage without cold-glue interruptions. Panel dimensions as small as 250mm × 100mm can be processed, which matters for drawer sides and narrow shelving that larger machines cannot grip reliably. The 1200W vacuum extraction port ties directly into workshop dust collection, keeping the trimming zone clear of chip debris that would otherwise score the polished edge surface.
The Cost of Skipping Configuration Detail
Machines quoted without confirming local voltage and frequency arrive unusable — this is one of the most common failures I encounter in post-installation service calls. Control panels delivered in a language the operator cannot read stall commissioning for days while translated documentation is sourced. Entry-level machines sold into production volumes they were never designed for develop premature wear on feed chains and trimming bearings, revealing the mismatch only after the warranty window narrows. These are not catastrophic failures; they are slow, expensive erosions of uptime [NEED_CITE: common commissioning failures in imported woodworking machinery].
Why Source the DW802 Through This Catalogue
The DW802 is built on the same in-house manufacturing line as the higher-tier models, sharing component sourcing and precision-grinding standards across the range. Every unit ships with a factory test record run on panel thicknesses matching the buyer’s material mix. Voltage, plug type, and control panel language are confirmed as line items at order stage, not left as assumptions. The four-stage quality verification covers incoming material through pre-shipment photography, so the machine you see in dispatch photos is the machine on the container floor. Engineer-led configuration recommendations arrive within a day of the initial inquiry, giving buyers a formal specification to compare before committing.
Documentation & Verification
- Machine specification sheet mapping tolerance, feed speed, and panel range to your material mix
- Electrical schematic with voltage and frequency confirmation matching your workshop grid
- CE declaration of conformity and ISO 9001 certificate available for download before order
- Factory test record photographed on your specified board thickness and edge banding material
- Pre-shipment verification images of the DW802 unit before crate closure
Installation, Commissioning & Support
- 1300 × 600 mm footprint requires a level concrete pad with clearance for panel infeed and outfeed
- 4200W total draw needs a dedicated circuit matching the confirmed 220V or 380V supply
- Arrives fully assembled — position, connect power and 0.4–0.8 MPa air supply, then commission
- PLC parameter setup for edge thickness 0.3–3mm and glue pot temperature calibrated on site
- Spare scraper blades and trimming cutters included to cover the initial run-in period
- Multilingual operation manual supplied in the language selected at order stage
What to Include with Your Inquiry
Send your panel material types, the edge banding strip materials you run most often, and your local voltage with frequency so the automatic edge banding machine manufacturer can confirm electrical compatibility from the start. Note the control panel language your operators need and whether your workshop air supply meets the 0.4–0.8 MPa requirement. If you are planning a phased line with upstream saws or downstream boring stations, mention those models so throughput matching can be addressed in the configuration proposal.
Frequently Asked Questions
Q: Where does the DW802 sit in the full catalogue — entry, mid-range, or full-function?
A: The DW802 is the compact entry point covering gluing, trimming, polishing, and head-and-tail cutting in one station. Higher-tier models in the same family add pre-milling, corner rounding, or multi-station configurations for workshops processing greater panel volumes or requiring tighter edge-to-surface tolerances before assembly.
Q: How do I choose the right model tier for my current panel volume?
A: Start with your daily panel count and the variety of board thicknesses you run. If you process a limited range of standard panel sizes and do not yet need pre-milling for laminate overhang, the DW802 covers the core functions. The configuration proposal maps your output to the model tier that handles it without premature wear.
Q: Can I add a pre-milling station later without replacing the entire machine?
A: The DW802 is a single-station straight-edge configuration. Adding pre-milling typically means moving to a different model in the range rather than retrofitting. The advantage of staying within the same product family is that control systems, spare parts, and service protocols remain consistent across the transition.
Q: What voltage and control panel language options are available?
A: Voltage is configurable across 220V, 380V, or tailored to your local grid, with frequency confirmed at order. The PLC control panel defaults to Chinese or English, with Spanish and other languages available on request. Plug options include EU, USA, AU, and UK standards.
Q: How does the DW802 match throughput with upstream saws and downstream boring machines?
A: The DW802 is designed for small-to-medium workshop volumes. If you are planning a complete line, share your panel saw model and boring machine specifications so the automatic edge banding machine manufacturer can confirm that feed rates and panel handling heights align across all stations in the layout.
